|Place of Origin:||Chongqing,China|
|Model Number:||DIR Oil Distillation Equipment|
|Minimum Order Quantity:||1 SET|
|Packaging Details:||WOODEN CASE|
|Delivery Time:||7-15 working days|
|Supply Ability:||200 SETS PER MONTH|
|Recovery Rate:||>85%||Recycled Oil Color:||No.1.5~No.1|
|Heating Temperature:||300-320degree||Principle:||Vacuum Distillation|
|Viscosity Index:||96-110||Flash Point (open):||228~224|
|Material:||SS#304 Stainless Steel And Carbon Steel||Function:||Remove Carbon Contamination,dirty Colloid,metal Particles, Gas, Water, Change Black Color To Golden Yellow|
|Oil Material:||Gasoline Engine Oil, Diesel Engine Oil, Mineral Oil, Synthetic Oil, Motor Oil, Transmission Oil, Hydraulic Oil And Other Lubricant Oil||Recycled Oil:||Yellow Base Oil,SN150-SN500|
|Space Required:||300-1000 Sq.m., The Bigger, The Better||Heating Method:||Thermal Fuel Boiler(customer Self-provide) Or Electricity Heating.|
1)The DIR seies machine can recycle gasoline engine oil, diesel engine oil, mineral oil, synthetic oil, motor oil, transmission oil, hydraulic oil and other lubricant oil to clean oil, like SN150,SN300,SN350,SN500.
2)The recovery rate of this machine is more than 85%
3)only need to add one chemical, named catalyst, percentage:2%-5%,Our company developed a kind of composite catalyst, through catalyzing, the harmful substances are selectively processed, for example, polymerization, shielding, passivation effect and discharged as residues, so as to remove the unstable factors of the waste lubricating oil, make it became qualified lubricenvironmental friendly used motor oil recycling decolorizing regeneration unitating base oil.
4)Low cost contain:
I: only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.
II:Heat consumption: 105kcal per ton waste oil
III: Power consumption: 40Kwh to recycle 1 ton waste oil
5)Recycled oil quality is good, color is No.1.5~No.2, like SN150
6)Environmentally friendly, without secondary pollution. Certification: ISO9001:2008, SGS, CE,BV
II. Working principle
The oil used with Catalyst mixing chemotherapy tank, and then is sent to the kettle distillation work on the circulation and hot, with increasing temperature, and the dripping of oil and gas and cooled in liquid through three cooling stages, and they are stored separately in water and gasoline / diesel and lubricants light receiving heavy lubricants. Noncondensable gas will be sent to the furnace boiler as it may burn and discharged after a pass through the disposer of the waste gas to ensure "no" discharge of waste gas, and can make use of waste as a fuel to avoid pollution of that.
III. technical features
1, applies to a wide range of waste oils: All kinds of lubricating oil (gasoline engine oil, diesel engine oil lubricants etc. All waste);
2, no secondary pollution during treatment: Do not waste gas, and disposal of water, oil sludge can be used as fuel.
3, good quality products: recycled oil does not change color and no smell.
4, the lower the cost of processing;
5, and the high rate of renewal.
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary pollution.
3. The machine can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less than US$30 to refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
6. High degree of automation.
1.what ability we have?
mature technologies and skillful workmanship (we control every single manufacturing process and make sure
it will be done perfectly in our factory with the lowest cost with the best quality assurance). products quality guarantee and about 30 days free train(competitors cant spend much time in you factory,stay long you will find many problems about their machine)
2.How to deal with the residue?
The final residue is semi solid and can be processed for manufacturing asphalt, or briquette for burn, or blend
with oil to make off-speck heavy fuel oil or to make greases for slow moving machineries.
3.Why we need to add the catalyst?
Catalyst will keep the recycled oil stabilization, avoiding the recycled oil oxidate and color change back to black. So the recycled oil from our machine will keep yellow at least half one year or one year.
4.Why the machine need work under vacuum condition?
The machine work under negative pressure, the boiling rage of the used oil is lower under high vacuum
condition, if without vacuum unit, the oil will crack when temperature up to 420-450 degree( and the oil will
become to diesel when temperature is 450 degree)