|Place of Origin:||Chongqing,China|
|Model Number:||DIR Oil Refinery|
|Minimum Order Quantity:||1 SET|
|Packaging Details:||WOODEN CASE|
|Delivery Time:||7-15 working days|
|Supply Ability:||200 SETS PER MONTH|
|Recovery Rate:||>85%||Recycled Oil Color:||No.1.5~No.1|
|Heating Temperature:||300-320degree||Principle:||Vacuum Distillation|
|Viscosity Index:||96-110||Flash Point (open):||228~224|
This technology uses a catalyst treatment through chemical treatment. The company has developed a kind of compound motivation, by stimulating, are harmful substances to selectively address, for example, polymerization, shielding, and the effect of passivation and discharge of waste, so as to remove the instability of the waste lubricating oil factors, and make it qualify for lubricating base oils.
This technique differs from the traditional distillation process with sulfuric acid, as they differ from the current hydrogenation technology. Operation of this technique is to: stimulate the processing of waste lube oils, lube oil distillation and then the new base (including gasoline engine oil, diesel engines, etc. Almost all types of waste oil recyclable). The oil does not mean that the oxidized and change color, no smell. Residue can be used as fuel, it will not make secondary pollution. This high-automatic technology, the operation is simple, do not control the complexity of the process, easy to learn and understand, low labor intensity, 1-2 people enough and any special requirement.
II. Working principle
The oil used with Catalyst mixing chemotherapy tank, and then is sent to the kettle distillation work on the circulation and hot, with increasing temperature, and the dripping of oil and gas and cooled in liquid through three cooling stages, and they are stored separately in water and gasoline / diesel and lubricants light receiving heavy lubricants. Noncondensable gas will be sent to the furnace boiler as it may burn and discharged after a pass through the disposer of the waste gas to ensure "no" discharge of waste gas, and can make use of waste as a fuel to avoid pollution of that.
III. technical features
1, applies to a wide range of waste oils: All kinds of lubricating oil (gasoline engine oil, diesel engine oil lubricants etc. All waste);
2, no secondary pollution during treatment: Do not waste gas, and disposal of water, oil sludge can be used as fuel.
3, good quality products: recycled oil does not change color and no smell.
4, the lower the cost of processing;
5, and the high rate of renewal.
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary pollution.
3. The machine can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less than US$30 to refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
6. High degree of automation.
1.what ability we have?
mature technologies and skillful workmanship (we control every single manufacturing process and make sure
it will be done perfectly in our factory with the lowest cost with the best quality assurance). products quality guarantee and about 30 days free train(competitors cant spend much time in you factory,stay long you will find many problems about their machine)
2.How to deal with the residue?
The final residue is semi solid and can be processed for manufacturing asphalt, or briquette for burn, or blend
with oil to make off-speck heavy fuel oil or to make greases for slow moving machineries.
3.Why we need to add the catalyst?
Catalyst will keep the recycled oil stabilization, avoiding the recycled oil oxidate and color change back to black. So the recycled oil from our machine will keep yellow at least half one year or one year.
4.Why the machine need work under vacuum condition?
The machine work under negative pressure, the boiling rage of the used oil is lower under high vacuum
condition, if without vacuum unit, the oil will crack when temperature up to 420-450 degree( and the oil will
become to diesel when temperature is 450 degree)
We provide many free services,such as:
1) engineer overseas service
2) Maintenance and replacement service, when it is necessary
3) tracking service for products for 12 months, lifetime service
4) lifetime technical assistant service.
5) old customer has more discount, or the customer introduce others to us, which has more discount.
6) Oil business plan suggestion.