|Place of Origin:||Chongqing,China|
|Minimum Order Quantity:||1 SET|
|Price:||USD7000-8500 PER SET|
|Packaging Details:||WOODEN CASE|
|Delivery Time:||7-15 working days|
|Supply Ability:||200 SETS PER MONTH|
|Flow::||3000Liters Per Hour||Working Pressure::||0.4Mpa|
|Weight::||500KG||Vacuum Degree:||-0.06 - -0.095Mpa|
|Temperature Range::||0 - 100℃||Water Content After Recycling:||Less Than 80ppm|
|Cleaness:||Less Than 6class(NAS)||Gas Content::||Less Than 0.1%|
Best Quality Vacuum Hydraulic Oil Treatment Purifier machine for removing water and impurities
The machine widely suitable for electric power, metallurgy, mine, machinery, chemical industry, transportation, manufacture and food industry etc. and it is particularly used to recover and regenerate all kinds of high precision lubricating oil, including unqualified hydraulic oil, gear oil, refrigerator oil, pressure dissolving machine oil, heat treatment oil anti-rubbing hydraulic oil and so on.
1.Effectively remove the iron, flake, dust, impurities, water and organic substance from the inferior oil. Moreover, it can eliminate organic and inorganic acid to recover the performance of hydraulic oil.
2.Strong demulsifying capability, which could easy to separate the massive moisture contents, also easy to get rid of the little tiny water from oil.
3.Adopt high precision and stainless steel FH rectangle filtration system that import from Japan, the precision of filter can reach up to 1 micron.
4.Utilize Tongruis own invented technology of H, P, M macromolecule material, which can reduce 1 or 2 color code of oil, the machine especially fit to high viscosity lubricant oil, freezing machine oil, hydraulic oil and gear oil etc.
Guarantees & Documentation:
TONGRUI Warrant the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment or twelve (12) months after the start up of the system. TONGRUI obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period. TONGRUI shall not in any event be held responsible for any indirect or consequential damages. The performance guarantee will be within limitations as detailed in duty & performance paragraph of this specification.
Two(2) copies of operating & maintenance manuals are supplied with each purifier. This system are designed to operate with the utmost simplicity and is required, please contact TONGRUI for additional charges.
Working principe& flow chart:
1, Working principle
When the oil purification starts, firstly contaminated oil enter into heater, secondly flowed into pre-filter under the difference pressure, in which the large impurities are removed. Thirdly oil goes into intermediate filter. Fourthly oil flow into water separator, the water separator adopts a special skill which changes the change the impaction of oil and water
to speed up trace water and coagulate big water which is separated from oil and stored in water content. After that, oil passes through the fine filter and fine particles of matters is
removed during the process. Finally oil flows into vacuum pump which use stereo-evaporation removing residual trace of water and steam is condensed in the condenser or expelled out by the vacuum system. the oil was transported out by oil pump. The purification process has finished.
|Index name||Unit||ZJD -10||ZJD -20||ZJD -30||ZJD -50||ZJD -75||ZJD -100||ZJD -150|
|Flow rate||Litres / hour||600||1200||1800||3000||4500||6000||9000|
|Vacuum degree||Mpa||-0.06 - -0.095|
|Temperature range||C||0 - 100|
(can be designed based on user’s requirement)
|Demulsifying Value||min||New oil≤8,Operating oil≤15|