We are pioneer in Used Oil Re-Refining Plant Manufacturing, Erection and Installation.
Lubricating oil after prolonged use in the engine’s crankcase gets degraded due to oxidation, presence of water, carbon particles, oxidation sludge etc. This oil, if not replace, will cause failure of the engine. The disposal of used oil is a major environmental problem unless it is processed safely as the indiscriminate disposal will cause pollution to water bodies and land fillings.
The proposal is to manufacture petroleum lubricant oils and other petroleum based products, from waste / used oils and manufacture of lubricants to the specification required to satisfy the International specifications.
This equipment adopt physicochemical actions to polymerize,passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regeneration the Waste oil to clean oil, save the component of the oil.
It’s easy to produce waste residue and bad smelling by traditional vitriol distilling, which will bring potential secondary pollution, moreover, it’s easy to change the color to black and produce the odor due to the recycled oil react with the oxygen. But after we use the alkaline complex catalyst refines the oil, the recycled oil havn’t change the color and havn’t create the odor. What’s more important, you can use the resid to be as the fuel to heating the oil, without any pollution. And the machine is easy to operate, only 1-2 workers can control the machine.
1. Catalyst system: Catalyst Reactor, blender;
2. Chemistry treatment systerm: Chemistry reactor, blender,oil pump
3. Heating distilling system: distilling tower, distilling kettle, heater, circle pump;
4. Cooling system: refrigerating machine, water pump, water tank, cooler I,cooler II, Condenser;
5. Vacuum system: Vacuum water receiver, vacuum pump, vacuum cooler
6. Degasification system: vacuum exhauster, exhaust fan, degasification plant, water pump, radiator,deodorizer.
7. oil storage system: distilling storage tank
8. Control system: all kinds of gauge( vacuum gauge, pressure gauge etc.) and electricity controller tank
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary pollution.
3. The machine can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
6. High degree of automation.