Sales & Support: Request A Quote
Home ProductsWaste Oil Distillation Equipment

Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel

Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel

    • Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel
    • Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel
    • Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel
    • Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel
  • Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel

    Product Details:

    Place of Origin: Chongqing,China
    Brand Name: TONGRUI
    Certification: ISO9001;2008, CE
    Model Number: BZ-II Oil regeneration machine

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 SET
    Price: USD3300-USD4800FOB Shanghai
    Packaging Details: WOODEN CASE
    Delivery Time: 7-15 working days
    Payment Terms: T/T,L/C
    Supply Ability: 200 SETS PER MONTH
    Contact Now
    Detailed Product Description
    Capacity: 6000Liters Per Hour Vacuum Degree:: -0.092 - -0.099Mpa
    Working Temperature: 45-65DEGREE Continous Working Time: 150H
    Fault Free: 4000H Breakdown Voltage: >65kv
    Water Content: 5-8ppm Filtering Precision: 3-5MICRON
    Gas Content: 0.1%

     

    Product introduction:

    BZ Used Oil Decolorization machine utilizes a physiochemical reaction to eliminate the acidic component, the suspended particles and the sedimentation material etc. from the oil, it mainly used to decolor by adding chemical from the waste transformer oil,hydraulic oil, turbine oil and refrigerant oil, switch oil to limpid clean oil

     

    Also it can be connected with ZJA,ZJB or ZJD machine, If oil acid value is too high, can choice our BZ regeneration device, reduce the acid value and dielectric loss, after process, acid value is less than 0.03(mgKOH/g), let quality indicator meet the standard of "GB / T 7596-2008" oil quality standards ". it can demulsification, dehydration, remove acid and impurities online, let the turbid emulsified oil become clear and transparent.

    Parameters:

    specification of BZ.png

    Technical Features:

    1. This machine utilizes a physiochemical reaction to eliminate acidic component, suspended particles and sedimentation materialetc. from inferior oil, it mainly used to regenerate the unqualified transformer oil and circuit breaker oil.

    2. It adopts a particular purification chemical to decolor the transformer oil, which can operate under the situation of transformer stays running in normal manner without cutting power or changing oil.

    3. After treating, the oil can reach the new oil standard, which not only retains the active elements, but also improves the insulation of device and enhances the ability of anti-oxygen. Besides, the cost will be reduced by 90% compared with traditional way of oil-change. (Suggested that you can use the recycling device in advance before use this machine, in the case of oil withstand voltage is treated to an acceptable range, the cost will be lower and the effect will be more obvious.)

    4. No.6-10 dark oil can be retrofitted to the color of No.2-4.

    5. It will reduce the wastage, and enable the treated oil getting back to the specification of new oil.

     

    Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel

    Used Transformer Oil Decolorization Regenerate Machine by adding Silica Gel

    DDR2_37.png

     

     

     

    Specification:

     

    Index name

    Unit

    BZ-I

    BZ-II

    BZ-III

    Capacity

    Liter/hour

    3,000L/H

    6,000L/H

    9000L/H

    Length

    Meter

    1.3

    1.4

    1.6

    Width

    Meter

    0.9

    1.05

    1.2

    Height

    Meter

    1.65

    1.65

    1.85

    Weight

    Kg

    450

    600

    800

    Diameter of inlet&outlet pipe

    Mm

    DN32

    DN40

    DN40

    Electric Motor

    KW

    1.5

    2.2

    2.5

    Capacity of oil pump

    M3/h

    YCB-3.3m3/h

    YCB-6.0m3/h

    YCB-10m3/h

    Speed of oil pump

    RPM

    960r/min

    1420r/m

    970r/m

    Type of oil pump

     

    Circular Teeth Gear Pump

    Work pressure

    MPa

    ≤0.4

    Breakdown voltage after processing

    KV

    ≥75

    Flash point

    ≥135

    Water-solubility acid

    PH

    ≥5.4

    Dielectric loss factor

    tgδ(90℃)%

    ≤0.005

    Impurities

    Micron

    ≤5(no free carbon)

    Acid

    MgKOH/g

    ≤0.03

    Power supply

    380V/3phase/50Hz 

     

    Contact Details
    Chongqing Tongrui Filtration Equipment Manufacturing Co.,Ltd

    Contact Person: Mr. Marian Tan

    Tel: 86-23-68935668-24

    Fax: 86-23-68935026

    Send your inquiry directly to us (0 / 3000)